FLOW CHART...1CONTROLS & FUNCTIONS...
Elation Professional® www.elationlighting.com - DMX Programmer Page 18Elation Professional® www.elationlighting.com - DMX Programmer Page 17Ther
Elation Professional® www.elationlighting.com - DMX Programmer Page 20Elation Professional® www.elationlighting.com - DMX Programmer Page 19DOWN
the RECORD BUTTON, press the UP BUTTON until the LED WINDOW shows “3:d.Pr”. 4. Press the RECORD BUTTON to access data download, the LED
Elation Professional® www.elationlighting.com - DMX Programmer Page 24Elation Professional® www.elationlighting.com - DMX Programmer Page 23WHEN
Elation Professional® www.elationlighting.com - DMX Programmer Page 25TWO YEAR LIMITED WARRANTYA. Elation® hereby warrants, to the original p
DMX Programmer™ NotesDMX Programmer™ NotesElation Profess
Specifications POWER SUPPLY: DC 9-15V, 500mA min. DMX CHANNELS: 64 DMX Channels INPUT/OUTPUTS: DMX Out 3-Pin N
Elation Professional® www.elationlighting.com - DMX Programmer Page 111918171615141312111098765432• Reversible DMX Polarity Output• 64 DMX Channels
1. FIXTURE BUTTONS - Used to Select any or all of 8 fixtures. 2. SPEED/FADE TIME FADER- Used to adjust the FADE TIME. Fade Time is the amount
Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR connector. Do
Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)Pin 1Pin 5 - Do Not UsePin 4 - Do Not UsePin 3Pin 2Pin 1Pin 3Pin 2Not UsedNot UsedData True (+ sign
1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate record mode. A red LED above the button will be lit and the LCD WINDOW
Elation Professional® www.elationlighting.com - DMX Programmer Page 12Elation Professional® www.elationlighting.com - DMX Programmer Page 11SCEN
Elation Professional® www.elationlighting.com - DMX Programmer Page 14Elation Professional® www.elationlighting.com - DMX Programmer Page 13RECO
Elation Professional® www.elationlighting.com - DMX Programmer Page 16Elation Professional® www.elationlighting.com - DMX Programmer Page 15RESE
Comments to this Manuals